MOTOBILT THE HAMMER SERIES FRONT BUMPER SKID PLATE - BARE STEEL JT Building custom four link suspension

Building custom four link suspension on a Jeep does not have to be difficult

which carry a lifetime warranty against bending or breaking

The stock Gladiator frame is trimmed approximately 14-5/8” and the total savings in length is approx

these wheels are equipped with a 6061-T6 aluminum beadlock ring

No drilling or cutting is required

MOTOBILT THE HAMMER SERIES FRONT BUMPER SKID PLATE - BARE STEEL JT Building custom four link suspensionThe Hammer Skid plate is an add on option to The Hammer Jeep JK Front Bumper. Skid plate is laser cut from 3 16 inch P and O steel and formed on a press brake. To install the skid plate, you must trim approx. 1 inch off each side of the crash bar. If you remove the skid plate later, the part that you've trimmed will not be seen. Skid plate bolts on to The Hammer front bumper and requires no welding. Features: Laser cut from 3 16 inch P and O steel