MatekSYS FLIGHT CONTROLLER H743-SLIM V3 3D Printer Filament and Resin The end result is a

The end result is a full range receiver

6 and 7 from the occasional impact

3 thermistors

the tip will deflect off of the Race Wire board

WHAT’S NEW IN THE MK3S+

MatekSYS FLIGHT CONTROLLER H743-SLIM V3 3D Printer Filament and Resin The end result is aFC Specifications MCU: STM32H743VIH6, 480MHz , 1MB RAM, 2MB Flash Board V1. 0 IMU: MPU6000 (SPI1) & ICM20602 (SPI4) Board V1. 5 IMU: MPU6000 (SPI1) & ICM42605 (SPI4) Baro: Infineon DPS310 (I2C2) OSD: AT7456E (SPI2) Blackbox: MicroSD card socket (SDIO) 7x Uarts (1,2,3,4,6,7,8) with built in inversion. 13x PWM outputs(including LED pad) 2x I2C 1x CAN 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2) 3x LEDs for FC STATUS (Blue, Red) and 3. 3V