Shinwa Radius Scale A-1 for R0.5 to R7mm HNT Gordon Tail Vise These versions of the Narex

These versions of the Narex Richter Chisels are the same as the standard versions of the Richter Chisels except they have extra long ash handles which some users prefer to the shorter standard handle length

They also work very well in drill presses because they have a brad type point instead of a lead screw

150 mm x 100 mm to DIN 875/0

Blade pitch of 55 degrees which will be optimum on hard woods or difficult & reversing grain

PROFI spoon carving gouges are hand-made in the Czech Republic

Shinwa Radius Scale A-1 for R0.5 to R7mm HNT Gordon Tail Vise These versions of the NarexThis gauge from Shinwa is made from hardened and tempered stainless steel and can be used to measure outside radius, outside diameter, sheet thickness and also is a rule. The radius measurements have a range of 0. 5 to 7 mm, 0. 5 to 6 mm for diameter, and 0 15cm for the rule. The accuracy is 0. 1 mm for radius, 0. 05 for diameter and 0. 15 mm for the length measurements on the rule. Made in Japan